![]() Tip: If bubbling occurs, simply poke tiny dots with a sharp point of an exacto knife (careful not to cut or poke too hard) and smooth the vinyl down with your finger. Ensure that the vinyl graphic has been applied completely and evenly on the vehicle. Using a retractable razor blade trim along door openings and fold excess vinyl inward. Do this process slowly watching that the decal has applied to the surface correctly. Remove application tape keeping it flat with the surface. Step 4: Remove Transfer Tape and Trim (if necessary) Go over the decal one more time with your squeegee, ensuring it's applied. Be sure to press every section of the decal down. Use smooth strokes going from the center outward in order to push air bubbles out. With a squeegee, starting at the center of the decal and working outward, firmly swipe down and out, pushing the vinyl onto the vehicle. Hold the center of the decal taught and keep the decal from touching the surface. Peel carefully from one side to the other and peel down until the backing paper is removed. Hinge the decal up toward masking tape and slowly peel the backing from the corner. Add a line of masking tape along the top of the decal once you are happy with the position - this is to prepare for hinging. Place masking tape on the corners to hold it in place. Use a level to be absolutely sure it is straight and even. Wipe the surface dry with a clean, dry, lint-free cloth.Īlign the decal, being sure to line the vinyl up with a horizontal line near it. Painted metals should be cleaned with an automotive detergent. Be sure to check for tack before removing the transfer tape.Īll surfaces must be considered dirty and must be cleaned prior to the application of the vinyl decal. Allow at least 10 minutes of drying time. Optional: For a less aggressive initial tack, but longer drying time, you can spray the tacky surface of your decal and the surface of your vehicle to allow for flexibility in positioning. Retractable razor blade, Squeegee, Tape measure/ Ruler, Spray bottle full of alcohol. Apply the decal, using a credit card or application squeegee to wipe it on the surface, trying to push the air bubbles out. The result is a beautiful product to display.Ĭlean the surface you are going to apply the decal to. Our cut vinyl decals are cut out on the best cutters in the industry. You can expect your vinyl decals to ship within 3-5 business days. A wide selection of colors are available. Vinyl decals look great on tinted windows, cars, trucks, trailers, laptops, and many other applications. Your design is intricately cut out then overlaid with transfer tape for easy installation. ![]() Single color decals made from performance quality vinyl. ![]() Special adhesive for less chances of bubbles. ![]() ■ Adhesive: Clear, solvent based permanent adhesive. ■ Precision die-cut decal with no background Dogs on Board with Paw Prints - Woof - Puppy Dog Car Decal Truck Window Sticker Condition: New Size: Color: Bulk savings: Buy 1 6.99/ea Buy 2 6.29/ea Buy 3 5.94/ea Quantity: 4 or more for 5.59/ea More than 10 available Price: US 6. Rebel Decal Shop only uses the best vinyl decal films available on the market. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |